.png)
Fragrance Oils for Perfumery | UFI codes | Wholesale, European supplier
 (2).png)
Fragrances and fragrance oils for perfumery
Making perfumes from fragrance oils
Making your own perfume does not have to be complicated. The basic ingredients are a high-quality fragrance composition, suitable perfumer's alcohol (ethanol) and, depending on the specific formulation, a fixative. At Aroma Global, we offer fragrance compositions suitable for perfume production as well as our special PFRP 17832 Fixative, which helps control the evaporation of fragrance components and the development of the fragrance on the skin.
What do you need to make perfume?
1. Fragrance composition
The fragrance composition defines the character of the perfume. For perfume production, you can choose from our MDB – fragrances inspired by well-known perfumes (we will gladly send you the list by e-mail upon request) and DBB – the complete selection is available below on this page. Individual fragrances can also be blended together, allowing you to create your own original fragrance compositions.
2. Perfumer's alcohol / ethanol
Ethanol acts as a carrier and solvent for the fragrance composition. After the perfume is applied, the alcohol gradually evaporates while the fragrance composition remains on the skin and continues to develop.
We recommend using high-quality alcohol suitable for perfume production with as neutral an odour as possible.
3. PFRP 17832 Fixative
PFRP 17832 Fixative helps slow down the evaporation of volatile fragrance components, supports a more balanced development of the fragrance composition and may extend the period during which the fragrance remains perceptible on the skin. For alcohol-based perfumes, 10–20% PFRP 17832 Fixative of the total weight of the finished perfume can be used as a starting point for testing.
Example for 100 g of finished perfume:
Option 1:
30 g fragrance composition + 10 g PFRP 17832 + 60 g ethanol
Option 2:
30 g fragrance composition + 20 g PFRP 17832 + 50 g ethanol
The ratios shown above are a starting formulation for testing and are not a universal formula for all fragrance compositions. The optimal amount of each ingredient must always be verified according to the specific fragrance, desired intensity, solubility, stability and the relevant IFRA documentation.
Is a fixative always necessary in perfume?
No. Some fragrance compositions may perform very well with ethanol alone. We therefore recommend evaluating the use of a fixative through practical testing.
A simple method is to prepare two small test samples:
- Sample A: fragrance composition + ethanol
- Sample B: the same fragrance composition + ethanol + PFRP 17832
You can then compare the fragrance intensity, its development on the skin, how long it remains perceptible, clarity and stability of both formulations.
A higher amount of fixative does not automatically result in a better or longer-lasting perfume. Each fragrance composition may behave differently.
How to make perfume step by step
1. Weigh the fragrance composition
We recommend working by weight rather than by volume. This allows the formulation to be accurately recorded and reproduced later.
2. Add the fixative
If you are using PFRP 17832, add it to the fragrance composition and mix thoroughly until homogeneous.
3. Add ethanol
Gradually add the required amount of perfumer's alcohol to the prepared mixture and mix evenly.
4. Check homogeneity
After mixing, check the appearance, clarity and homogeneity of the mixture. Record the exact formulation and the production date of the test sample.
5. Allow the perfume to mature
Seal the finished mixture and allow it to mature, ideally in a cool place protected from direct light.
6. Evaluate the result
The first evaluation can be carried out after 24 hours. However, we recommend comparing the result again after 7 and 14 days.
Some fragrance compositions may benefit from a longer maturation period.
7. Filtration and final filling
If required for the specific formulation, the perfume can be filtered before final filling. It can then be filled into the final perfume bottles.
How long should perfume mature?
There is no single universal maturation time suitable for all fragrance compositions.
We therefore recommend checking the prepared sample at several intervals:
- after 24 hours,
- after 7 days,
- after 14 days,
- and, if necessary, after a longer period.
When testing, do not evaluate the fragrance alone. Also check clarity, colour, homogeneity and overall stability of the mixture.
Why can perfume become cloudy?
Cloudiness does not automatically mean that an error occurred during production. It may be caused by:
- limited solubility of certain components of the fragrance composition,
- the composition of the specific fragrance,
- other ingredients used in the formulation,
- the ratio of individual ingredients,
- temperature changes during storage.
The fact that a perfume is perfectly clear immediately after production does not, by itself, guarantee long-term stability. We therefore recommend testing every new formulation before starting serial production.
How much fragrance oil should be used in perfume?
There is no single percentage suitable for every fragrance composition. The amount depends primarily on the desired perfume intensity, the specific fragrance composition, its solubility and stability, and the limits specified in the relevant IFRA documentation.
The 30% fragrance composition shown in our example is therefore a starting point for testing a more intensive perfume and not a universal dosage.
Not everything can be solved through an online shop.
Do you have a non-standard requirement? Get in touch with us. A different quantity, special conditions, an individual project, product development, a specific technical question or a requirement that you simply cannot find in our online shop?
Contact us. Many interesting collaborations begin with a request for which there is no standard “Order” button.
